CNET CWR-854 Betriebsanweisung PDF herunterladen (Seite 5)

2 Preparing Your Network

Preparing Your Network

In this chapter, you’ll learn what to do before configuring your router.

Before you can configure your router, you need to set up all the computers on your network for

TCP/IP networking.

Collecting ISP Information

The following information needs to be gathered from the ISP before you can configure your

router:

․Has your ISP assigned you a static IP address, or will it be assigned dynamically? If they have

given you a static IP, what are the IP address, Subnet Mask, Default Gateway and DNS

addresses used for this connection?

․Does your ISP use PPPoE? If so, what is your PPPoE username and password?

Call your ISP if you’re not sure of the answers to these questions.

Configuring Windows for IP Networking

You need to configure each computer in your network for TCP/IP networking. If you plan to use the

DHCP feature (recommended), you should configure each computer to receive an IP address

automatically. See the procedure below.

If you don’t plan to use DHCP, you’ll need to manually assign an IP address to each computer.

Refer to your Windows documentation for instructions on IP assignment.

To configure Windows to receive dynamic IP address:

1. Click the Start button. Select Settings and click the Control Panel icon. Double-click the

Network icon.

2. On the Configuration tab, select the TCP/IP line for the applicable Ethernet adapter. Do not

choose a TCP/IP entry whose name mentions DUN, PPPoE, VPN, or AOL. If the word TCP/IP

appears by itself, select that line. Click the Properties button.

1 2 3 4 5 6 7 8 9 10 ... 52 53

Keine Kommentare

CNET CWR-854 Betriebsanweisung Seite 5