CNET CWP-800 Bedienungsanleitung PDF herunterladen (Seite 20)

Table 3-2 Configuration

LABEL DESCRIPTION

Profile Name Enter the profile name that you want.

SSID User can key in the intended SSID name or use pull down menu to

select from available wireless network.

PSM CAM (Constantly Awake Mode) – the wireless NIC will stay full power

when AC power cord is plugged into power outlet.

PSM (Power Saving Mode) – the wireless NIC will enter the power

saving mode.

Network Type There are two wireless modes.

(A) Infrastructure - This mode allows wireless and wired networks to

communicate through an access point.

(B) Ad-hoc - This mode allows wireless-equipped computers to

communicate directly with each other.

Preamble There are three types: Auto, Long and Short are supported.

Ad-hoc wireless

mode

There are three types: 802.11B only, 802.11B/G mixed and 802.11G only

modes are supported.

TX Power Transmit power, the amount of power used by a radio transceiver to

send the signal out. User can choose power value by sliding the bar.

RTS Threshold User can adjust the RTS threshold number by sliding the bar or key in

the value directly. The default value is 2347.

Fragment Threshold User can adjust the Fragment Threshold number by sliding the bar or

key in the value directly. The default value is 2346.

Channel Only available for setting under ad-hoc mode. User can choose the

channel frequency to start their ad-hoc network.

OK Confirms and saves the settings.

Cancel Ignore the settings and return to the previous screen.

Help Click Help to display on-line help information in a pop-up screen.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 36 37

Keine Kommentare

CNET CWP-800 Bedienungsanleitung Seite 20